Astm A527 Galvanized Steel Plate A526 G90 Z275 Full Hard Cold Rolled
Galvanized Steel Plate Galvanized Metal Sheet Astm A527 A526 G90 Z275 Coating Galvanized plate
Galvanized sheet / plate can be cut, machined or welded by common methods used for regular steel, but adequate ventilation should be used to avoid inhalation of fumes when heated. Sheared edges are not galvanized and can be treated with a cold galvanizing paint to maintain protection if desired. All dimensions are before the galvanizing process. |
Specfications
Product
|
Galvanized sheet /coil
|
Width
|
600--1500mm
|
Thickness
|
0.12-5mm
|
Length
|
6-12m or According To Customer's Demends
|
Zinc Coating
|
30g/m2—275g/m2
|
Spangle
|
Big spangle, normal spangle, small spangle, non-spangle |
Surface Treatment
|
Chromate, Galvanized, Skin Pass, Passivity and Oiled(un-oiled)
|
Steel Grade | Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, or Customer’sRequirement |
Capacity
|
15,000MT/Month
|
Edge
|
Mill edge, cut edge
|
Delivery Time | within 15-20 days after receive 30% deposit or depend on Quantity |
Payment Term | T/T, Irrevocable L/C at sight (30% deposit) |
Trade Term | EXW, FOB, CFR, CIF |
Chemical Composition
Specification | Grade | Chemical Composition(wt%) | ||||||
C | Mn | Ni | Cr | Mo | Ti | |||
ASTMJIS | 316L/022Cr17Ni12Mo2 | ≤0.03 | ≤2.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | - | |
JIS | SUS316L | ≤0.03 | ≤2.0 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 | - | |
ASTMJIS | 316Ti/SUS 316Ti | ≤0.08 | ≤2.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | 5*(C+N)-0.7 |
Properties
Spec | Grade | Mechanical Property | Physical Property | ||||
Y.S (N/MM2) |
T.S (N/MM2) |
EL (%) |
HRB |
Specific Heat (J/g℃) |
Modulus of Elasticity (KN/mm2) | ||
ASTM/GB | 316L/022Cr17Ni12Mo2 | ≥170 | ≥485 | ≥40 | ≤95 | 0.5 | 193 |
JIS | SUS316L | ≥175 | ≥480 | ≥40 | ≤90 | 193 | |
ASTM | 316Ti | ≥205 | ≥515 | ≥40 | ≤95 | 0.5 | 200 |
Applications:316L: Widely used in corrosion-susceptible environment and some mechanical components those are difficult to make heat treatment after forming in more corrosive environment.
316Ti: Mainly used for industrial components.
|